Music recipes · Drone plus a melody played by the reverb

The singing reverb

The synth holds one note. The reverb plays the melody: its built-in eight-step sequencer retunes the cloud in a pentatonic scale, gliding from note to note.

What you'll hear

A warm, unchanging drone. Above it, the reverb itself sings a slow, gliding melody, always in key, because the NightSky snaps each step to a scale.

The trick: the NightSky has an eight-step sequencer for its SIZE/PITCH knob. Freeze a note, and each step retunes the frozen cloud.

1. PERfourMER: a long drone

Synth channel 1 on MIDI channel 1; channels 3 and 4 VOLUME down.

  • WAVEsinetrianglesquaresawnoiseEXTPlenty of harmonics for the reverb to work with.
  • OCTAVE16'Low and full.
  • CUTOFF10 o'clockDark.
  • RESONANCE10 o'clockA little glow.
  • Filter LFO INT9 o'clockSlow movement in the drone.
  • LFO WAVES&Hsinesaw or squareSmooth.
  • LFO SPEED/PHASE8 o'clockVery slow.
  • VCA MODEEGGATEONEnvelope.
  • ATTACKnoonA slow swell.
  • SUSTAINmaxHolds as long as the note.
  • RELEASE2 o'clockLong fade.
  • PANnoonIn the main left output, which feeds the pedals.

2. Grand Canyon: a warm analog-style echo

  • DELAY TYPEDMMThe Deluxe Memory Man emulation: dark, warm repeats.
  • MOD RATE (mini knob)noonThe manual says noon matches the original's chorus setting.
  • MOD DEPTH (mini knob)10 o'clockGentle chorus.
  • DELAYnoonMedium.
  • FEEDBACK10 o'clockA few repeats.
  • DELAY LVL11 o'clockUnder the drone.

3. NightSky: set up the sound

  • TEXTUREsparsedensediffuseDense: the pitch steps stay clear.
  • LENGTH3 o'clockVery long.
  • QUANTIZEsmoothhalf stepscaleEvery step snaps to a scale.
  • ScaleHold QUANTIZE and press PRESET button 2Major pentatonic (it's also the factory setting). Button 1 is minor pentatonic.
  • FILTERregenlow passDarkens as it decays.
  • HIGH CUTnoonSoft.
  • LOW CUT9 o'clockBarely.
  • SHIMMER (knob)minOff: the sequence is the movement.
  • DEPTHminNo modulation.
  • DRYnoonUnity.
  • REVERB2 o'clockThe singing cloud should be loud.

4. NightSky: program the melody

  1. Start the drone (step 5 below) so there's audio in the reverb. The manual's tip: program with sound in the buffer.
  2. Hold the INFINITE footswitch until the ON LED turns red: you're in Sequence mode. The 8 PRESET buttons are now the 8 steps.
  3. Press PRESET buttons 1 to 5 so they light amber: five active steps. An unlit step is skipped, not a rest.
  4. For each step: hold its PRESET button and turn SIZE/PITCH to pick its note. Counter-clockwise is higher.
  5. Add glide: hold SHAPE and turn REVERB to about 11 o'clock. Steps now slide into each other.
  6. Run it: tap the FAVORITE footswitch on the beat a few times. It plays at that tempo; each step can be up to 2 seconds.
  7. Stop: press the ON footswitch once (it returns to step 1). To leave Sequence mode, hold INFINITE again.

5. The OXI One: play it

  1. Tempo around 60 BPM.
  2. Sequencer 1 (Mono, Ch 1): one note on step 1, tied across all 16 steps.
  3. Sequencer 2 (Mono, Ch 2): the same note an octave lower, also tied. Or leave the bass out: the drone is enough.

6. The performance

  • The manual suggests this: hold the drone with INFINITE, then program and run the sequence over the frozen cloud.
  • Change the scale: leave Sequence mode (hold INFINITE), hold QUANTIZE and press PRESET 1 for minor pentatonic, then re-enter. The same melody turns sad. (In Sequence mode the PRESET buttons are the steps.)

If it sounds wrong

  • The sequence won't run: at least two steps must be active (lit amber).
  • Steps sound out of key: QUANTIZE isn't on scale.
  • The melody is too fast: tap FAVORITE more slowly.

Sources