Music recipes · Drone plus a melody played by the reverb
The singing reverb
The synth holds one note. The reverb plays the melody: its built-in eight-step sequencer retunes the cloud in a pentatonic scale, gliding from note to note.
What you'll hear
A warm, unchanging drone. Above it, the reverb itself sings a slow, gliding melody, always in key, because the NightSky snaps each step to a scale.
The trick: the NightSky has an eight-step sequencer for its SIZE/PITCH knob. Freeze a note, and each step retunes the frozen cloud.
1. PERfourMER: a long drone
Synth channel 1 on MIDI channel 1; channels 3 and 4 VOLUME down.
- WAVEsinetrianglesquaresawnoiseEXTPlenty of harmonics for the reverb to work with.
- OCTAVE16'Low and full.
- CUTOFF10 o'clockDark.
- RESONANCE10 o'clockA little glow.
- Filter LFO INT9 o'clockSlow movement in the drone.
- LFO WAVES&Hsinesaw or squareSmooth.
- LFO SPEED/PHASE8 o'clockVery slow.
- VCA MODEEGGATEONEnvelope.
- ATTACKnoonA slow swell.
- SUSTAINmaxHolds as long as the note.
- RELEASE2 o'clockLong fade.
- PANnoonIn the main left output, which feeds the pedals.
2. Grand Canyon: a warm analog-style echo
- DELAY TYPEDMMThe Deluxe Memory Man emulation: dark, warm repeats.
- MOD RATE (mini knob)noonThe manual says noon matches the original's chorus setting.
- MOD DEPTH (mini knob)10 o'clockGentle chorus.
- DELAYnoonMedium.
- FEEDBACK10 o'clockA few repeats.
- DELAY LVL11 o'clockUnder the drone.
3. NightSky: set up the sound
- TEXTUREsparsedensediffuseDense: the pitch steps stay clear.
- LENGTH3 o'clockVery long.
- QUANTIZEsmoothhalf stepscaleEvery step snaps to a scale.
- ScaleHold QUANTIZE and press PRESET button 2Major pentatonic (it's also the factory setting). Button 1 is minor pentatonic.
- FILTERregenlow passDarkens as it decays.
- HIGH CUTnoonSoft.
- LOW CUT9 o'clockBarely.
- SHIMMER (knob)minOff: the sequence is the movement.
- DEPTHminNo modulation.
- DRYnoonUnity.
- REVERB2 o'clockThe singing cloud should be loud.
4. NightSky: program the melody
- Start the drone (step 5 below) so there's audio in the reverb. The manual's tip: program with sound in the buffer.
- Hold the INFINITE footswitch until the ON LED turns red: you're in Sequence mode. The 8 PRESET buttons are now the 8 steps.
- Press PRESET buttons 1 to 5 so they light amber: five active steps. An unlit step is skipped, not a rest.
- For each step: hold its PRESET button and turn SIZE/PITCH to pick its note. Counter-clockwise is higher.
- Add glide: hold SHAPE and turn REVERB to about 11 o'clock. Steps now slide into each other.
- Run it: tap the FAVORITE footswitch on the beat a few times. It plays at that tempo; each step can be up to 2 seconds.
- Stop: press the ON footswitch once (it returns to step 1). To leave Sequence mode, hold INFINITE again.
5. The OXI One: play it
- Tempo around 60 BPM.
- Sequencer 1 (Mono, Ch 1): one note on step 1, tied across all 16 steps.
- Sequencer 2 (Mono, Ch 2): the same note an octave lower, also tied. Or leave the bass out: the drone is enough.
6. The performance
- The manual suggests this: hold the drone with INFINITE, then program and run the sequence over the frozen cloud.
- Change the scale: leave Sequence mode (hold INFINITE), hold QUANTIZE and press PRESET 1 for minor pentatonic, then re-enter. The same melody turns sad. (In Sequence mode the PRESET buttons are the steps.)
If it sounds wrong
- The sequence won't run: at least two steps must be active (lit amber).
- Steps sound out of key: QUANTIZE isn't on scale.
- The melody is too fast: tap FAVORITE more slowly.
Sources
- NightSky manual: Sequence mode, programming steps, glide and tempo (pp. 21–24), QUANTIZE and scales (pp. 6–7), factory scale (p. 41).
- Grand Canyon manual: DMM, "The noon setting is equivalent to a DMM's chorus setting" (p. 18).
- PERfourMER MKII manual: LFO (p. 16), envelope (p. 20).
- OXI One MKII manual: ties (p. 55).